Hello,
I just test the WEP option of wicontrol between openbsd-3.0 and
openbsd-current. The two system are both i386 and similar cannot
communicate when the WEP is on. I had tested that win98 and OpenBSD-3.0
can communicate with each other even the WEP is on. Is there a problem of
openbsd-3.0 and openbsd-current when WEP is on ? Here is my wicontrol
output of openbsd-3.0 and openbsd-current. Any idea ? Thanks.
Clarence
======= OpenBSD-3.0 ==========
NIC serial number: [ 01UT49412530 ]
Station name: [ private_base ]
SSID for IBSS creation: [ IBSS ]
Current netname (SSID): [ private_network ]
Desired netname (SSID): [ private_network ]
Current BSSID: [ 02:02:2d:40:67:ea ]
Channel list: [ 8191 ]
IBSS channel: [ 3 ]
Current channel: [ 3 ]
Comms quality/signal/noise: [ 0 27 27 ]
Promiscuous mode: [ Off ]
Port type (1=BSS, 3=ad-hoc): [ 1 ]
MAC address: [ 00:02:2d:40:67:ea ]
TX rate (selection): [ 3 ]
TX rate (actual speed): [ 2 ]
Maximum data length: [ 2304 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ On ]
Microwave oven robustness: [ 0 ]
Roaming mode(1:firm,3:disable): [ ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time: [ 100 ]
Card info: [ Lucent, Firmware 7.28 variant 1 ]
WEP encryption: [ On ]
Authentication type
(1=OpenSys, 2=Shared Key): [ ]
TX encryption key: [ 1 ]
Encryption keys: [ hello ][ ][ ][ ]
===========================================================
======== openbsd-current ===========
NIC serial number: [ 01UT49412491 ]
Station name: [ ibm380xd ]
SSID for IBSS creation: [ IBSS ]
Current netname (SSID): [ private_network ]
Desired netname (SSID): [ private_network ]
Current BSSID: [ 02:02:2d:40:67:ea ]
Channel list: [ 8191 ]
IBSS channel: [ 3 ]
Current channel: [ 3 ]
Comms quality/signal/noise: [ 0 27 27 ]
Promiscuous mode: [ Off ]
Port type (1=BSS, 3=ad-hoc): [ 1 ]
MAC address: [ 00:02:2d:40:67:c3 ]
TX rate (selection): [ 3 ]
TX rate (actual speed): [ 2 ]
Maximum data length: [ 2304 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ On ]
Microwave oven robustness: [ 0 ]
Roaming mode(1:firm,3:disable): [ ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time: [ 100 ]
Card info: [ Lucent, Firmware 7.28 variant 1 ]
WEP encryption: [ On ]
Authentication type
(1=OpenSys, 2=Shared Key): [ ]
TX encryption key: [ 1 ]
Encryption keys: [ hello ][ ][ ][ ]
========================================================
|